Tube and Fittings Scaffolding

Scaffolding Tube EN10219

Scaffolding  Tube

Application: Used to Erect tube & coupler scaffold structures.
( Assorted sizes- max 6.0m/21Ft.)
Type: Hot dip galvanized,
* BS 1139/ EN 39 = 4mm wall thick 48.3 OD 235N/mm2 (34 ksi) (24 kg/mm2 ) yield stress.

*EN 10219 =3.2mm wall thick 48.3 OD 320N/mm2 (46ksi) (32 kg/mm2 ) yield stress.

Surface Finish: Self finished/ Hot Dip Galvanized.

Double Coupler (Drop Forged)

Double Coupler  (Drop Forged)Application: Used to connect two Scaffold tubes at 90º
Applicable on tube size: 48 mm Dia
Component Weight: 1025 grams

SWL : 9.4 kN (2100 Ib )
Class - B – EN 74

Swivel Coupler (Drop Forged)

Swivel  CouplerApplication: Used to connect two Scaffold tubes at any angle
Applicable on tube size:48 mm Dia
Component Weight: 1050 grams
Surface Finish:Cold Zinc Plated

WL : 6.25 kN (2100 Ib )
Class - A– EN 74

Single Coupler / Putlog Coupler (Drop Forged)

Single Coupler / Putlog CouplerApplication: Used to connect two Scaffold tubes at 90º
Applicable on tube size: 48 mm Dia
Component Weight:620 grams

Surface Finish: Cold Zinc Plated

WL : 0.63 kN (120 Ib. )
Class - A – BS 1139

Beam Clamp / Gravlock/ Girder Coupler (Drop Forged)

Beam Clamp  Gravlock Girder CouplerApplication: Used to make a suspension or Tie point in the Exiting structure Where

Scaffold Structure Where Scaffold structure or ties are rigidly attached
( Must be used in pairs)
Class - BS 1139

BRC - Board Retaining Coupler (Drop Forged/Pressed)

Beam Clamp Gravlock Girder CouplerApplication: Used to secure Scaffold Board
Applicable on tube size: 48 mm Dia

Component Weight: 600 grams

Surface Finish: Cold Zinc Plated
Class - BS 1139

Sleeve Joint (Pressed)

Sleeve  JointApplication: Used to extend Scaffold Tubes externally

Applicable on tube size:
48 mm Dia
Component Weight:        1050grams

Surface Finish:
Cold Zinc Plated (Golden Colour)

WL :
                                  0.59 kN (435 Ib – ft.)
Class -                              B – BS 1139

Spigot / Joint Pin(Pressed)

Spigot Joint PinApplication: Used to extend Scaffold Tubes internally
Applicable on tube size: 48 mm Dia

Component Weight:
700rams

Surface Finish:
Cold Zinc Plated(Golden Color)
Class - BS 1139

ADJUSTABLE BASE JACK

ADJUSTABLE BASE JACK Used to place under all scaffold Standards to bear and take the whole weight load the scaffold structure and spread it to the ground or base to ensure stability of the Scaffold

Pipe OD (mm)
Size (mm) : 38 mm: 660mm Long (Base 120x120x5mm)

SWL: **Axial
Compression 30-KN.L40-kN.57-kN

ADJUSTABLE U-HEAD JACK

ADJUSTABLE U-HEAD JACKUsed in systems Scaffold to bear the load vertically, & in from work structure attaché d with U – Head and Capable to Bear Load from all directions ( Vertical/ Horizontal / Diagonal
Pipe OD (mm)
Size (mm)
SWL
Compression : 38, 35, 34, 32
: 450, 500, 610, 700
: ** Axial
: 30-KN./40 - kN. /57 – kN.

UNIVERSAL JACK

UNIVERSAL JACKUsed to Conjunction with socket base, U head and
Drop head adaptor. Provide 500mm fine &croarse adjustment at the top or bottom of Scaffolde.

Pipe OD (mm)
Size (mm) : 38 mm
: 660mm Long (Base 120x120x5mm)
SWL: **Axial
Compression 30-KN.L40-kN.57-kN

BASE PLATE

BASE PLATE

A 150xmmx150mm 6mm thick steel plate providing a full bearing surface for load distribution from standards.

It has a 50mm high integral spigot and two fixing holes for use on sole plates.

Weight : 0.90Kg

Castor Wheels ( Rubber tired )

Castor Wheels

Can be used with any 48.4mm OD tube and with many system scaffolds.

They Are fitted with wheel brakes that cannot be accidently released, and can be firmly secured to the tube to prevent displacement.